Friday, 3rdSeptember 2010
|
|
 |
Home >>
Home Automation >>
X10 >>
LM12 Plug-in Lamp Modules
- Plug and Play installs in seconds
- Allows on/off and dim/bright control
These plug-in modules will allow you to remotely control plug-in table lamps,
and other plug-in type lights.
Click here to see how these work
There's no re-wiring to do. Simply set the X10 address, un-plug the lamp,
plug the lamp into the module, and plug the module into your mains socket.
You instantly have X10 control of the device.
The Lamp Module has a minimum rating of 60W, and a maximum rating of 300W.
The Lamp Module is dimmable, and should only ever be used to control
incandescent, or 12 V halogen lamps.
Use in conjunction with an X10 transmitter like a
IR7243
,
CM12U
,
Mini Timer
,
MC10
, or
SM10
. You can also use an
RF based solution (
HR10
,
MS13
,
KR22
, or
SS13
) as long as you also have a
TM13 RF Receiver module.
| Compatibility |
| Incandescent bulb |
OK |
| Fluorescent bulb |
NOT OK |
| CFL bulb |
NOT OK |
| Megaman "Dimmerable" bulb |
NOT OK |
| LED bulb |
NOT OK |
Technical Data
Supply voltage: 230 V +/-10% 50 Hz
Supply current: 20 mA capacitive
Making capacity: 60 to 300 W (incandescent, and 12 V halogen lamps only)
Regulating time: 4,4 sec +/- 0.2sec from fully on to off
EMC emission: According to EN 50081-1
EMC immunity: According to EN 50082-1
Electrical safety: According to EN 60950 and EN 60065
Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz
Input impedance: 55 W (L - N) at 120 kHz
Ambient temperature: - 10 degrees C to + 50 degrees C (operation)
- 20 degrees C to + 70 degrees C (storage)
Dimensions: 52 x 122 x 33 mm (width x height x depth without plug)
 Approved
Customer Comments about this product
Score:
Just what I needed to complete a room full of LM12u's. Excellent product
(Philip. Purley)
|
|
Part No |
Description |
Stock Availability at 16:32 Sep, 03 |
If ordered on-line Price = |
Qty to
order |
|
