Tuesday, 7th February 2012

Xantech 791-44 Infra-Red Splitter/Amplifier

Use infra-red splitters/blocks to expand your infra-red emitters , or to wire-in an infra-red receiver.

10062 Xantech 791-44 Connects 1 (or multiple) IR receiver to 10 IR outputs for use with plug-in emitters . Has screw-down terminals and 3.5mm socket for easy attachment of an infra-red receiver .

Download Manual (pdf).

Note: This unit requires a 12V DC Regulated power supply (See adaptor listed below). The splitters are NOT polarity protected. Centre pin MUST be +, and outer must be -, incorrect polarity will burn the unit out. We will only warranty these Blocks if you use the 12V Adaptor listed below.

If you wish to expand your Powermid Dual Power, then you'll need a 3.5mm plug with some cable, to allow it to be attached to one of our splitters. P/N 10636 does just that!