Saturday, 4th February 2012
 

Xantech 789-44 Infra-Red Splitter

Use infra-red splitters/blocks to expand your infra-red emitters , or to wire-in an infra-red receiver.


10666 Xantech 789-44 Connects 1 (or multiple) IR receiver to 4 IR outputs for use with plug-in emitters . Has screw-down terminals and 3.5mm socket for easy attachment of an infra-red receiver.

Download Manual (pdf).

Note: This unit requires a 12V DC Regulated power supply (See adaptor listed below). The splitters are NOT polarity protected. Centre pin MUST be +, and outer must be -, incorrect polarity will burn the unit out. We will only warranty these Blocks if you use the 12V Adaptor listed below.

If you wish to expand your Powermid XL, then you'll need a 3.5mm plug with some cable, to allow it to be attached to one of our splitters. P/N 10636 does just that!

Approved




Customer Comments about this product
Score:
I've used Xantech products before so I knew this would do the job I needed. It controls several bits of kit in a cupboard (John. Woodham Walter)

 
Part No Description Stock Availability at 16:50 Feb, 04 If ordered on-line Price = Qty to
order
10666 Xantech 789-44 4 Way IR Splitter Block Stock = 9 £ 24.00
(£ 20.00 + VAT)
10572 12V DC Adaptor UK Plug 500Ma Regulated 2.1 Plug Center Pin Stock = 35 £ 9.60
(£ 8.00 + VAT)
 
12555 4 Emitter IR READY KIT - Xantech 789-44, 4 x 283M Emitters, & PSU. NO RECEIVER Discontinued
No Back Orders Permitted 		   
 
10636 3.5mm plug->bare wires (2.5 metre) (Allows PowerMid/KAT5 To Attach To Block) Leadtime 5-7 Days £ 2.40
(£ 2.00 + VAT)
HTTP/1.1 503 Server: Microsoft-IIS/4.0 Date: Sat, 04 Feb 2012 16:50:10 GMT Connection: close Content-type: text/html Page-Completion-Status: Normal Error

Error Occurred While Processing Request

Error Diagnostic Information

Request canceled or ignored by serverServer busy or unable to fulfill request. The server is unable to fulfill your request due to extremely high traffic or an unexpected internal error. Please attempt your request again (if you are repeatedly unsuccessful you should notify the site administrator). (Location Code: 26)