Saturday, 4th February 2012

Classic Bell Box and Dummy

Super slim, self-contained bellbox includes twin alternating LEDs, strobe, timed sab c-w nicad, high intensity piezo sounder plus rugged polypropylene cover, high impact polystyrene backplate, polycarbonate lens and all electronics in a polycorbonate case. Dimensions (HxWxD) of bell boxes: 315x185x70mm.

Requires 12V AC Adaptor

Dual failsafe cut-off timer
Sounder Output 114dBA@1m

Note, if you plan to use this Bell Box with the SC2800 Alarm System that we sell, you will additionally need a UM7206 Universal Module, as well a 10572 AC Adaptor to power the Bell Box. You will also need to make a link between "STB-" and "TRG" otherwise only the Xenon strobe activates

Approved

Instructions to wire the Bell Box to a UM7206

Wire the UM7206 like this:
12v supply (positive) goes to "Hold Off +"
12v supply (ground) goes to "Hold Off -"

To trigger the alarm you make a contact between STB- and RTN, these are the two contacts that you would wire through the UM7206.

Then when you send an "on" to the UM7206 the bell box will activate and when you send an "off" the the UM7206 it will stop.

The bell box will not work "on its own" with just flashing LEDs as the LEDs are an indication of "alarm healthy" status and if the bell box has nothing connected to it then it believes that the alarm is not healthy.