Friday, 10th September 2010

Xantech 780-00 J Box Infra-Red Receiver

These IR receivers are designed to mount in single-gang electrical US J-boxes. The mounting screws and red lens insert allow the installer to use decorator-style wall plates. The ubiquitous 780 has been the choice of custom installers for years. Use it for general applications at lowest cost.

FEATURES

Red talkback LED tests system for correct wiring as well as indicating infrared reception
Includes dark lens for decorator-style wall plate
Nominal reception angle: 45 degrees off axis
Cable requirements for long lengths: three-conductor/24 gauge wire up to 200', 22 gauge up to 600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded OK)
Maximum cable length: One mile with 18 gauge
Maximum current output: 100 milliamps
Maximum number of directly driven IR emitters: Up to four connected in series (780-10 and 780-80 only). Use Xantech Connecting Blocks for emitter expansion
Power requirements: 12 volts DC @ 10 milliamps
Connections: 4-screw terminal block on unit
Dimensions: 1-3/4" x 4" x 1" (45mm x 102mm x 26mm)