Friday, 3rdSeptember 2010

Home >> Home Automation >> ZWave >> Z-Wave Remote Control

Provides wireless radio frequency control of HomePro Plug-in Dimming/Switching Modules
Dims lamps and switches lamps and appliances on and off. Soft on allows lamps to ramp up to the proper brightness slowly
Provides Timers, Child Protection and Burglar Deterrent
Can create 64 groupings of lamps and 32 different scene settings
Can operate up to 64 HomePro Plug-In Modules and Wall Switch Modules
User friendly menu based operation
Requires 2 AA batteries (included)

NOTE: ONE of these units is required to set up your system. All devices must be learned to one of these controllers. This device information can then be copied to other controllers such as more remotes, or the HomePro USB or RS232 computer interface.

FAQ:

Q. I have replaced my ZTH200 for another, but now none of my modules will register with the new remote
A. That's correct. Once the module has been registered with a ZTH200, it will not register with another ZTH200 unless it is reset. This is done via the remote:
Menu -> Setup -> Reset Unit -> Are You Sure? -> Press Button On Module
You will need to do this for each module you have
If you have two ZTH200 remotes, then you can copy the device information from one remote to the other via the Setup Menu

Customer Comments about this product

Score: