Friday, 10th September 2010

Home >> Xantech >> Xantech 480-95 Dinky Link Plasma Friendly Infra-Red Receivers

Designed to work with plasma displays - Attaches discretely to front of TV
Extremely small package, 7/16" x 5/16" x 2-1/8" (11mm x 8mm x 54mm)
Talkback LED for system tests
IR input bandwidth: 30 - 100 kHz
Nominalreception range: >50 feet

Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of Xantech's custom installers for a small, inconspicuous receiver. It was designed for placement in very tiny spaces. One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the 480 behind a grille and still receive the IR commands up to 20 feet away. If longer range is necessary, you must drill a 3/8-inch hole in the grille.

You would normally use these products to control devices that are out of sight (in a cupboard for instance), for hardwiring infra-red distribution around the house, or for sending commands back to a home controller, like HomeVision.

480B-95 - Black case, Plasma TV Friendly version, and mini 3-conductor 7 ft. ribbon cable and separate screw terminal block (supplied). Terminates in bare wires

480S-95 - Same as the 480B-95 except with silver case.

Note. Does NOT include Block (eg CB12, 789-44, etc), emitters or 12V power supply