Saturday, 4th February 2012

Home >> Home Automation >> ZWave >> Z-Wave Wall Mounted Dimmer Switch 2-Wire (No Neutral)

The ZDW232 is a single dimming receiver which controls the connected load On/Off and Dim/Bright and also serves as a transmitter using multiple switch pushes/taps (Controls one group of 5 ZWave modules)

ZDW232 replaces an existing wall switch

ZDW232 can be programmed as a routing slave to establish firm signal routes and can be "associated" with other ZWave devices in order to control them

ZDW232 can be configured to control shades and window coverings via the ZWave network

The ZDW232 can be easily installed to directly or remotely control the on/off and dimming of any connected incandescent lighting or to control a motorised window shade or blind

Three groups of up to 5 ZWave devices can be controlled from the ZDW232 with two or three quick taps on the switch, by configuring that function

The ZTH200 remote control can transmit an "All Lights On" command to all ZWave lighting modules for security reasons and using it's "Timer" feature, it can switch the ZDW232 and other ZWave modules on and off at pre-selected times

Requires a minimum 35mm deep back box for installation

Installation Manual (pdf)

Load 25w - 500w incandescent lights only
Dims 82mm (W) x 82mm (L) x 48mm (D) (Back shell depth is 33.15mm)
Frequency 868.42MHz European ZWave frequency

Part No	Description	Stock Availability at 15:52 Feb, 04		If ordered on-line Price =	Qty to order
12575	ZWave ZDW232 Wall Mount Dimmer, 240V, 500W, 2 Wire (NO NEUTRAL), 1 Rocker	Discontinued No Back Orders Permitted