Tuesday, 7th February 2012

4022UK X10 Compatible Single House Code X10 RF Radio Receiver and X10 Appliance Module

X10 compatible RF Receiver 433MHz to X10 PLC Gateway
Better RF receive range than standard X10 TM13U
Built-in Appliance Module (Can be set to any Address 1-16), rated at 800watts RF controlled only

The 4022UK is an X10 compatible Gateway. It receives X10 RF signals transmitted by the likes of KR22, MS13, HR10, SS13, etc and then converts those signals into X10 power line signals that travel along the mains wiring of your house to awaiting X10 receivers

The unit also features a built-in Appliance Module rated up to 800watts. The built-in module can be set as any address between 1 and 16 by learning the X10 code from another transmitter. This allows you to turn a plugged in device on and off by RF (Not by X10 on the mains)

The House Code of the unit is programmed in moments with the use of an X10 RF transmitter. The unit can learn all 16 Address Codes on a single House Code (ie it can learn A1, A2...A16, or B1, B2...B16). Note some places advertise this unit as being a All House Code module - it is NOT - It will only operate on a single house code

Note the 4022UK will not work with the ebode RF transmitters IMRF, EM, RMA, PMML and TP. Please use a TM13U instead

Compatibility
Incandescent bulb	OK
Fluorescent bulb	NOT OK
CFL bulb	OK
Megaman "Dimmerable" bulb	OK
LED bulb	OK


Technical Data
Supply voltage:        230 V +/-10% 50 Hz
Supply current:        0.12amp (module ideal)
Making capacity:       800w Max
Fuse Fitted:           5A
RF receiver frequency: 433.92MHz
Ambient temperature:   - 10 degrees C to + 50 degrees C (operation)