Tuesday, 7th February 2012
|
|
 |
Home >>
Home Automation >>
X10 >>
SAIX12 MicroModule
The SAIX12 is both a switch actuator and an interface equipped with two 230V
inputs. This module must be fitted in junction or distribution boxes and can
be used in combination with: Wall sockets, Switches, Retractive switches with
one or two normally open contacts, Movement detectors or sensors (e.g. light
detector switch) with a 230V output. The SAIX12 can be used for easy
automation of lighting circuits (or appliances) so that they can be switched
remotely or manually
- Two 230 V inputs
- A maximum of two freely programmable addresses can be controlled
- Loads up to 16 A*, suitable for resistive, inductive or capacitive loads
- A two or three way switching circuit can be automated with only one module
- Can be incorporated in a group command
- Automatic status indication possible
- Status retention in the event of the loss and recovery of mains voltage
- Can be programmed remotely
- Can be used with 2 (or a dual) momentary switches, allowing On Only, and Off Only operation
Note that Positive and Neutral are required for operation of this unit.
MicroModules require an X10 transmitter to set their internal
address (they do not have Code wheels like the older modules). The cheapest
CE Approved transmitter to do this is the
MC10.
Note that the CM12 is not able to set a MicroModules address
| Compatibility |
| Incandescent bulb |
OK |
| LV Halogen |
OK depending on transformer |
| GU10 Incandescent bulb |
OK |
| Fluorescent bulb |
OK |
| CFL bulb |
OK |
| Megaman "Dimmerable" bulb |
OK |
| Most LED bulbs |
OK |
| Philips Master LED Mains GU10 bulb |
OK |
 Approved
|
Part No |
Description |
Stock Availability at 20:05 Feb, 07 |
If ordered on-line Price = |
Qty to
order |
|
