Saturday, 4th February 2012

Home >> Home Automation >> X10 >> S10 2223E Double Light Switch (Two Rocker)

Dual Light Switch - On/Off/Dim/Bright
Neutral Connection NOT Required
400w maximum combined draw (300w max if using low voltage transformers)
Suitable for use with incandescent lamp, mains halogen and LV halogens
Soft Start/Soft Fade
Responds to All Lights On/All Units Off
Electronically set X10 address
Returns to previous dim level when turned on again
Minimum Load = >40w

Back Dimensions: 43.25W x 47H x 18.9D

To program the unit:
Press Top (light turns on), and then Bottom THREE times (light turns off). On the THIRD press hold the button until the light turns on again
Release the button
Send an X10 OFF command equalling the address you want the module to be
Repeat for the other button
Each switch can be on any House Code/Unit Code

Please note this fitting should be fitted into a plastic back box, or if using a metal back box you must ensure that the rear of the switch does not touch the back box otherwise the switch will not operate properly