Friday, 22nd November 2019
 

X10 Signal Test Requipment (X10 Transmitter, and X10 Signal Strength Meter)


It sends a constant P1 ON/OFF X-10 signal at a precise output voltage and measures the strength (voltage) of this signal.

Plug the signal strength indicator into a wall outlet and send an X-10 command. The indicator will tell you the quality of the X-10 signal between the 2 locations. Has 5 signal strength levels showing the strength of the X-10 signal. High-frequency noise affecting the X-10 signal can be sensed with this device and can be neutralized by installing Filters.

The proper way to trouble shoot for noise is to use an XPTT Test Transmitter and an XPTR Signal Strength Indicator. The XPTT is plugged in at the transmission point where it will transmit a constant line carrier "P1" on/off command. Taking the XPTR you go from outlet to outlet in the home and take a signal strength reading.

The XPTT transmits a 2V signal and the XPTR can detect from 2V down to 25MV. The lowest possible signal that can make a module respond properly is 100MV. As you go around the building and you see a fluctuation in the signal you may have detected a noise-producing device. While leaving the XPTR plugged in you can systematically unplug a device (TV, VCR, computer or low voltage lighting power supply) and see if you detect any change in the signal amplitude. You may have to shut off a fuse if the device is hard wired without a plug. If no change is seen go on to the next device. When you see a signal increase upon unplugging a device, then you have detected an offending device. Now all that you have to do is purchase an FM10 plug in filter. The FM10 is plugged into the wall where the offending device was plugged in and then plug the device into the FM10. The X10 signal will now pass freely through the electrical system without the noise, blocked by the FM10, passing onto the power line.

Please note that this product will not work on 3 phase installations as a test device - it will not send the X10 signal onto the other 2 phases

Rental Service. Most people don't actually want to buy this product. They just need it for a few weeks. Therefore we offer a rental service. You simply buy the product below, and pay for it, use it to diagnose your problem, and then you request a Returns No via MY ACCOUNT. We charge you GBP7.50 +VAT per week. When the unit is returned we just credit your credit card back the cost of the product less the rental charge.


Approved

 
Part No Description Stock Availability at 07:05 Nov, 22 If ordered on-line Price = Qty to
order
10948 X10 XPTT X10 Test Transmitter & XPTR X10 Signal Meter Discontinued.    



 

Quick Nav
Home  | Home Automation  | Infra-Red Control  | TV/Video distribution  | Home Security  | Light Switches  | Cable, Wall Outlets  | Networking Products  | Speakers  | Video Cameras | Curtain control  | Tools & Accessories

©Copyright 1999-2019 Let's Automate Ltd
###