Wednesday, 8th December 2021

PIR Occupancy Sensor/Light Switch

The WAPIR replaces an existing wall switch - no neutral wire is needed.

It fits into a plaster depth (16mm) wall box. The WAPIR model also has a manual override off switch on the front of the plate.

The WAPIR requires a permanent live supply, and should only be used in applications where the lights would not be on for more than 12 hours per day. This is to allow its rechargeable battery enough time to recharge itself from the mains supply.

The WAPIR is suitable for small offices, meeting rooms, tutoring rooms, etc. The override off button enables the lights to be held off during video presentations, etc. For wall mounting only.

Please note that this item has been in stock for some time. Whilst it does come with batteries, these batteries will now be discharged. You need to buy batteries for this item separately. Hence the extremely low price

Time lag range: 10 seconds to 40 minutes in 9 steps
Photocell range: 100 to 1000 lux and inactive
Min Loading: 40W resistive or 100W inductive, or for wiring in parallel 50W resistive 120W inductive per WAPIR in the circuit.
Max Loading: 1500W (6 amps) of any type of load (including fluorescent lights and fans)


Part No Description Stock Availability at 00:15 Dec, 08 If ordered on-line Price = Qty to
12031 WAPIR Wall Mounted Occupancy Sensor/Light Switch (No Neutral Wire Required) Stock = 1 £ 12.00


Quick Nav
Home  | Home Automation  | Infra-Red Control  | TV/Video distribution  | Home Security  | Light Switches  | Cable, Wall Outlets  | Networking Products  | Speakers  | Video Cameras | Curtain control  | Tools & Accessories

©Copyright 1999-2021 Let's Automate Ltd