Saturday, 21st October 2017
 

Home >> Home Automation >> X10 >> X10 Compatible Plug-in Lamp Module


  • Plug and Play installs in seconds
  • Allows on/off/dim/bright control via X10
  • Manual on/off control on module
  • Soft start and soft fade
  • Memory Dim - remembers last dim level, and turns back on at this level
  • Blue LED X10 Activity Light
These X10 compatible plug-in modules will allow you to remotely control plug-in table lamps, and other plug-in type lights. It has many advantages over the original X10 LM12, since it has memory dim (module returns to the same dim level it was at, the last time you turned it off), and has soft start (when turned on, slowly fades up from off, and when turned off, slowly fades down to off - looks cool, and saves bulb life). It also has a manual on/off button, and an module status/X10 activity LED.

It is simple to set the X10 address using any X10 transmitter (for example a Mini Controller). Just press and hold the module's button in for about 5 seconds until the LED lights. On the X10 transmitter send the address you want the unit to be, eg A1 On, and then the module's address is set for good!

The LED flashes when there is X10 activity on the line. The LED is also used for programming the module, so you know it is in programming mode. Note that the LED does not show the module's On/Off status

The Lamp Module has a minimum rating of 60W, and a maximum rating of 600W. The Lamp Module is dimmable, and should only ever be used to control incandescent, or mains halogen lamps.

This module has advantages over real X10 modules:
Manufactured using modern surface mount components to the highest specification
Has local on/off control button
Memory Dim - remembers last dim level, and turns back on at this level
X10 Activity/module status LED

Compatibility
Incandescent bulb OK
Fluorescent bulb NOT OK
CFL bulb NOT OK
Megaman "Dimmerable" bulb NOT OK
Halogen Energy Saving (Incandescent look-a-like) bulb OK
LED bulb NOT OK


Technical Data
Supply voltage:      230 V +/-10% 50 Hz
Supply current:      0.07amp (module idle)
Making capacity:     60 to 300 W (incandescent, and 12 V halogen lamps only)
Fuse Fitted:         5A

Approved

 
Part No Description Stock Availability at 18:43 Oct, 21 If ordered on-line Price = Qty to
order
12168 2026UK X10 Compatible PLUG-IN Lamp Module (UK 3 Pin Plug) (Domia 10) Stock =>200
No Back Orders Permitted
£ 10.20
12230 *** TEN PACK *** 2026UK X10 Compatible PLUG-IN Lamp Module (UK 3 Pin Plug) Stock = 8 £ 72.00
12892 *** 25 PACK *** 2026UK X10 Compatible PLUG-IN Lamp Module (UK 3 Pin Plug) Stock = 40 £ 150.00



 

Quick Nav
Home  | Home Automation  | Infra-Red Control  | TV/Video distribution  | Home Security  | Light Switches  | Cable, Wall Outlets  | Networking Products  | Speakers  | Video Cameras | Curtain control  | Tools & Accessories

©Copyright 1999-2017 Let's Automate Ltd
###