Home >> Owl - Wireless Electricity Useage Meter
Save up to 25% on your Electricity Bills
It's easy with the award winning Owl (aka Electrisave Mark 2)
The Owl will show you:
The Owl is a portable, easy to read electricity monitor designed for both use in the home and small office.
By knowing which appliances are using a lot of electricity you can adopt new energy saving practices, which means you aren't wasting electricity and you are saving money on your electricity bills. By using the Owl you can make any household more energy efficient and SAVE MONEY!
Did you know that...
The Owl can save you up to 25% on your current electricity bills. What's more by saving electricity, you'll also be doing your bit for the environment... The average household could save up to £200 a year by taking energy efficiency measures. Nearly £5 billion is wasted on energy in the UK every year. This is enough to give every man, women, and child £84 a year. Research on electricity usage shows that by using a device such as an Owl provides instant feedback on energy consumption, raises awareness and plays a significant role in educating and reducing energy consumption... Imagine... how much energy could be saved in the UK alone, if every household was to use an Owl!
Some Installation Examples
If in doubt about the safety of your meter or you are at all unsure how to install the Owl always consult a qualified electrician
Q. The unit works fine in all respects except that in the temperature and humidity display the "Smiley Face" and "COM, DRY WET" indicators are not showing. If you reset the device these indicators do flash up on the display
A. The Humidity/Temperature display icon functionality will operate as below:
The Com icon will only appear when the ambient temperature is between 20 - 25 degrees C and when the humidity is between 40 - 70%. The Dry or Wet icon will only appear if the humidity is less than 40% or more than 70% respectively, no matter what the temperature. As for the Temperature Units, I am afraid that these are factory set and cannot be toggled between degrees C / degrees F.
Q. I have it all setup but the transmitter is not sending to the receiver
A. Check the batteries on both units. Whilst the lights and display may be working, you will probably find one of the batteries is not installed correctly