Home >> Home Automation >> X10 >> LM12 Mark 2 Plug-in Lamp Modules
Click here to see how these work
There's no re-wiring to do. Simply set the X10 address, un-plug the lamp, plug the lamp into the module, and plug the module into your mains socket. You instantly have X10 control of the device.
The Lamp Module has a minimum rating of 60W, and a maximum rating of 300W. The Lamp Module is dimmable, and should only ever be used to control incandescent, or 12 V halogen lamps.
Use in conjunction with an X10 transmitter like a IR7243 , CM12U , Mini Timer , MC10 , or SM10 . You can also use an RF based solution ( HR10 , MS13 , KR22 , or SS13 ) as long as you also have a TM13 RF Receiver module.
Technical Data Supply voltage: 230 V +/-10% 50 Hz Supply current: 20 mA capacitive Making capacity: 60 to 300 W (incandescent, and 12 V halogen lamps only) Regulating time: 4,4 sec +/- 0.2sec from fully on to off EMC emission: According to EN 50081-1 EMC immunity: According to EN 50082-1 Electrical safety: According to EN 60950 and EN 60065 Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz Input impedance: 55 W (L - N) at 120 kHz Ambient temperature: - 10 degrees C to + 50 degrees C (operation) - 20 degrees C to + 70 degrees C (storage) Dimensions: 52 x 122 x 33 mm (width x height x depth without plug)