Wednesday, 8th December 2021

Home >> Home Automation >> X10 >> LD11 DIN mounted lamp module

  • X10 controlled dimmer
  • Suitable for dimming Incandescent Lamps (60W - 700W) and Dimmable Electronic Low Voltage Transformers (60W - 525W)
  • Compatible with "Professional X10" commands allowing direct access to 64 dim levels
  • Memory dim - returns to the same dim level, the next time you turn it on
  • Fade-up and Fade-down - gradually raises the light's brightness when turned on, and gradually lowers the brightness when turned off
  • DIN mounted - installs in Consumer Unit
The LD11 is a DIN mounted lamp module, and will control standard bulb lights, and low voltage lighting (using leading edge transformers) up to a maximum of 700 watts. The lamp module is useful when you wish to be able to dim the light you are controlling. The module has soft-start (when turned on, the module will gradually brighten the light from 0 up to the last dim level. When turned off, the reverse occurs. This extends the life of your bulbs enormously), and can be dimmed using Extended X10 functions (as sent by the likes of the HomeVision Home Controller which gives a dimming range of 64 units, you can additionally dim or brighten from any level to any level).

The really great thing about the LD11 (over and above the LW10) is that it "remembers" the last dim level. So when you next turn the module on, it will soft-start up to the previous dim level (the level it was when you last turned it off).

The LD11 requires a momentary push switch to operate (ie: a switch that is only on when you press it). We recommend using one the switch types shown in the righthand column of this page. It is possible to use any momentary switch as long as it can handle mains voltage.

A momentary push of the switch will either turn the light on or off. If you press and hold the switch then the light will cycle through dim/brighten.

Click here for a wiring diagram for the LD11 (40Kb)

Incandescent bulb OK
LV Halogen OK depending on transformer
GU10 Incandescent bulb OK
Fluorescent bulb NOT OK
Megaman "Dimmerable" bulb NOT OK
Most LED bulbs NOT OK
Philips Master LED Mains GU10 bulb OK

Technical Specifications
Supply voltage:      230V +10%/-15% 50Hz
Supply current:      =< 20mA capacitive
Making capacity:     60W to 700W
Compatible Lamp:     Incandescent, Mains Halogen, Low Voltage Halogen
                     NOT compatible with Low Energy, Fluorescent
Regulating time:     3.5s +- 0.2s from full On to Off
EMC emission:        According to EN50081-1
EMC immunity:        According to EN50082-1
Electrical safety:   According to EN60950 and EN60065
Signal sensitivity:  15mVpp min 50mVpp max at 120KHz
Input impedance:     => 60 Ohms (L-N) at 120KHz
Fuse:                2.5A(T)
Connections:         Screw type terminals for phase, neutral,
                     switched phase, control 2
Ambient temperature: -10C to +50C (operation)
                     -20C to +70C (storage)

Dimensions:          Length 50, Width 80, Height 65 mm


Click here for details on low voltage transformers

Click here for info on our optional larger sized DIN rail enclosures to mount your LD11s

Click here for info on our high quality brass and stainless steel momentary push switches

Click here for info on our range of budget momentary switches

Click here for info on our range of budget momentary switches

Click here for info on our MK GRID Plus range of momentary switches and versatile faceplates, at great prices!

Click here for details on a momentary action bathroom pull switch

Part No Description Stock Availability at 00:00 Dec, 08 If ordered on-line Price = Qty to
10002 LD11 DIN Mounted X10 Lamp Module Discontinued.    


Quick Nav
Home  | Home Automation  | Infra-Red Control  | TV/Video distribution  | Home Security  | Light Switches  | Cable, Wall Outlets  | Networking Products  | Speakers  | Video Cameras | Curtain control  | Tools & Accessories

©Copyright 1999-2021 Let's Automate Ltd